29
2.
Replacing the V-belt of a cardan-shaft drive and electric motor
Remove the cover and the cardan shaft protection.
Loosen six head screws (2) on the protective plate (1) and remove it.
Loosen the safety hexagon nut (5) on the tensioning screw.
Loosen the tensioning screw (4).
Remove old V-belts (6).
Insert new V-belts.
Adjust the tension of V-belts with the tensioning screw (4).
Fasten the safety nut on the tensioning screw (5).
Mount the protective plate and fasten it with six screws.
When replacing V-belts, the protective plate of the electric motor and the electric motor must
also be removed.
All protective devices must be in place before the machine is operated.
