49
2500A - 2700A - 3400A - 4000A - 4300A
600A - 700A - 1000A - 1200A - 1700A - 2000A
Electrical connections
WARNING! Electrical connection to the machine
to the power supply must ONLY be carried out
by a qualified electrician.
WARNING! Electrical lines must be established
in full respect of CEI standards.
WARNING!mBefore establishing the electrical
connection, make sure that the power supply is
off. Also ensure that it is not possible to reconnect
the power during the operation.
To carry out the electrical connections of the machine to the
power supply, carry out the following procedures:
•
use suitable equipment to check the efficiency of the
grounding system;
•
check that the voltage and network frequency
correspond to those of the machine (see identification
label);
•
open the door of the electrical panel;
•
remove the plastic screen of the electrical panel using a
star screwdriver;
D7
A
D7
B
D5
POWER SUPPLY CABLE
(at customers at care)
POWER SUPPLY CABLE
(at customers at care)
Version C
Version D-T-H
POWER SUPPLY CABLE
(at customers at care)
N: Neutralpole
Only with option:
- condensate drain pump
- Fresh air fan motor
•
pass the cables inside using the power supply cable
inlet D7A which connects to the main switch D5;
•
refer to the wiring diagram and connect the cable to the
main switch D5.
