Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by other
equipment, the cordless phone provides
AutoSecur
e
(which electrically locks your phone when each
handset is in the cradle) and
Random Cod
e
digital security which automatically selects one of over
262,000 digital security codes for each handset and the main base. If the handset battery pack is
completely discharged or the battery pack is removed, the digital security code will be lost. If this
happens, a new security code is set automatically the next time the battery pack is charged. In the rare
situation that you suspect another cordless telephone is using the same security code, you can change
the code.
For XSA1255;
1) Remove the handset from the cradle. Press and hold the
find hs
key on the main base.
2) While holding the
find hs
key, place the handset in the main base, and leave the handset in
the main base for more than three seconds. A new random security code is set.
For 1;
1) Remove the handset from the cradle. Press and hold the
find hs
key on the main base.
2) While holding the
find hs
key, place the handset in the main base, and leave the handset in
the main base for more than three seconds.
3) Remove the handset from the main base. Then place the second handset in the main base and
wait for more than three seconds. No need to hold the
find hs
key this time.
4) Press
the
talk/flash
key on one handset. Once you make sure
Talk
appears on the display, press
the
end
key. Then, try with the second handset. If each handset displays
Talk
, a new security
codes set. Otherwise, return to step 1 and try again.
A
D
D
IT
IO
N
A
L
IN
F
O
R
M
A
T
IO
N
[50]
