6
INST
ALLING
AND ADJUSTING YOUR PHONE
AC
Adaptor
Line in
Australia
From
Telephone
Socket
3
5
4
8
10
9
6
2
7
New
Zealand
1
Mounting Directly on a Wall
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting screws into the wall.
Make sure the wall material is capable of supporting the weight of the base and
handset; otherwise, damage to the unit could result.
Use #10 screws with anchoring devices suitable for the wall material where the
base will be placed.
1. Insert the screws, with their appropriate anchoring devices,
100mm apart. Allow 5mm between the wall and screw
heads for mounting the phone.
2. Fit the Wall Mounting Adaptor to the telephone Base.
3. Plug the AC adaptor into the base.
4. Place the AC adaptor cord inside the left moulded
channel cord holder.
5. Plug one end of the long telephone cord into the TEL
LINE jack on the base.
6. Place the telephone cord into the right moulded channel cord holder.
7. Place the base on the screws and push down until it’s firmly seated.
8. Plug the other end of the telephone line into the telephone wall jack.
(Remember; the phone must be fully charged before you can use it.)
9. Plug the AC adaptor into a standard
240V AC wall outlet.
10. Fully extend the antenna on the base.
5mm
100mm
WALL MOUNTING
!
Use only the AC
adaptor supplied with
this phone.
