6
INSTALLING YOUR PHONE
For Desktop Use
1. Connect the base AC adaptor to the power jack and the telephone cord to the TEL
LINE jack. Route the cords as shown below:
2. Plug the AC adaptor into a standard 240V AC power outlet, and connect the
telephone cord to a standard telephone wall jack.
3. Connect the
Corded Handset,
by using the coiled cord, to the connector on the left
side of the base.
For Wall Mount Use
1. Press the latches at the top of the stand to release its position.
2. Flip the stand by till it locks into place as shown below:
AC Adaptor
TEL Line
Your telephone base is ready for desktop use from the factory. If you want to mount your
telephone on a wall, follow the guide on page 6.
Flip the stand
Latches
