8
Place the Repeater on the Wall
You can mount the repeater directly to a wall using the
horizontally aligned mounting slots at the back of the
repeater unit. Before doing this consider the following:
Avoid electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when
inserting screws into the wall.
♦
Mount the repeater within distance of a working 240V
AC power outlet.
♦
The Repeater unit is NOT waterproof. If mounted onto an
outside wall place under an eave or roof overhang where it
is protected from direct weather conditions, DO NOT place
in direct sunlight.
Insert two #10 screws into the wall, 57 mm apart. Leave
the heads of the screws about 6 mm away from the wall.
(For best results, use a level to ensure the screws are
even.)
1.
Remember to use appropriate anchors for the wall
material.
•
Keeping the AC adapter cord out of the way, place the
repeater over the screw heads and slide it down into
place.
2.
To remove the unit from the wall, just slide it up and lift it off
the screw heads.