7
For wall mount use only
1. On the front of the base,
pull the locking tabs up and
back. Then, slide the stand
straight off the opposite
direction you put it on.
2. Rotate the clip 180 degrees.
3. Flip it from front to back and
slide it back into the slot.
Connect the power and telephone Cords
1. Connect the base AC adaptor to the DC IN 9.0V jack and the telephone cord to
the
TEL LINE
jack. Route the cords as shown below.
2. Plug the AC adaptor into a standard 240V AC power outlet, and connect the
telephone cord to a standard telephone wall jack.
3. If you are mounting the phone on the wall, place the mounting slots over the
pins on the wall plate; slide the base down to lock it into place.
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
For Desktop Use
For Wall Mount Use
select the Country
Select Country menu appears the first time you power is on the XDECT 6145BT
base. Select the country where you will use the phone.
1. Use
UP
or
DOWN
to highlight Australia or New Zealand, then press
SELECT
.
2. The base configures its settings for the selected country, and it returns to
standby.
Once you select the country,
Select Country
menu will not appear when the power
is on.
If you select the wrong country and you need to try again, use
Factory Reset
menu
option in the
Base Setup
menu (see “Using the Menu” on page 15 and “The Base
Setup Menu” on page 16).
