Uniden WDSS 5315 Owner'S Manual Download Page 49

Page: 49 / 56

Liquid Damage

Moisture and liquid can damage your cordless phone.

If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off

the liquid, and use as normal.

If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the

handset battery compartment or vent openings on the base), follow the steps below:

Handset

Base

Remove the battery cover and leave it off for

ventilation.
Disconnect the battery pack. Leave the battery

cover off and the battery pack disconnected for at

least 3 days.
Once the handset is completely dry, reconnect the

battery pack and the battery cover.
Recharge the handset’s battery pack for 5 to 20

hours before using.

)

Disconnect the AC adapter from the base, cutting

off electrical power.
Disconnect the telephone cord from the base.
Let dry for at least 3 days.

)

2)
3)

IMPORTANT

: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.

CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent

damage to the handset, base and the microwave oven. After following these steps, if your

cordless telephone does not work, please call our Customer Service Hotline (see back cover

page).

•

Summary of Contents for WDSS 5315

























































Search results

Summary of Contents for WDSS 5315

Reviews:

Related manuals for WDSS 5315

Brands by name

Popular brands

Uniden WDSS 5315, Owner'S Manual

Search results

Summary of Contents for WDSS 5315

Reviews:

Related manuals for WDSS 5315

Brands by name

Popular brands