Uniden WDECT3315, Owner'S Manual

Page: 47 / 56

[ 43 ]
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary. In the rare
situation that you suspect another cordless telephone is using the same security
code, you can change the code.
To change the digital security code:
1. Perform the “System Reset” menu options (“De-register the Handset” and
“Replacing the Base Setting”) for all the handsets you have (see page 17).
2. To register all the handsets do the following steps:
1) Place a handset, one at a time in the base.
2) Registration starts automatically.
While registering
Handset Registering
appears in the display.
3) When the registration is complete,
Registration Complete
appears in the
display.
4) Repeat steps 1 - 3 for another handsets.
If the registration fails,
Registration Failed
appears in the display. Try the steps
above again.
Changing ThE DigiTal SECuriTy CODE
ADDITIONAL
INFORMATION