Using the Radio’s Menus
38
Setting Up a Group MMSI
You can program a group MMSI. A group MMSI is 9 digits in length.
1.
Rotate
PUSH/SELECT
to select
GROUP MMSI
, then press
PUSH/SELECT
to select it.
2.
To enter the first digit of the group MMSI, rotate
PUSH/SELECT
until the digit appears, then
press
PUSH/SELECT
. The digit you entered appears and the flashing cursor moves to the
next position.
3.
Repeat Step 2 for each of the group MMSI's digits. When you have entered each of the
group MMSI's digits, a confirmation screen appears.
4.
If the displayed group MMSI is correct, rotate
PUSH/SELECT
to select
YES
, then press
PUSH/SELECT
to confirm it.
Otherwise, If the displayed group MMSI is not correct, rotate
PUSH/SELECT
to select NO, then
press
PUSH/SELECT
to confirm it. Then repeat Steps 2 and 3 to enter the correct group MMSI.
Setting Up a User MMSI
When you first turn on the radio, you must program a user MMSI. A user MMSI is 9 digits in length.
Important
: If you have already set the user MMSI,
do not change it
unless you have
received a new user MMSI. After you program a user MMSI for the first time, you can only
change it once more. If you try to change the user MMSI a third time, the radio will not accept
the change. To change the user MMSI again, you must return the radio to Uniden for reprogramming.
1.
Press
MENU
. A screen appears containing options you can select to work with the radio's
features.
2.
Rotate
PUSH/SELECT
to select
SETUP
, then press
PUSH/SELECT
to
select it.
3.
Rotate
PUSH/SELECT
to select
USER MMSI
, then press
PUSH/
SELECT
to select it.
If a user MMSI has already been programmed, a screen similar to the
following appears.
Stop here
.
If a user MMSI has already been programmed twice, a screen similar to
the following appears.
Stop here
.
Otherwise, if a user MMSI has not been programmed, you see the
following screen.
4.
To enter the first digit of the user MMSI, rotate
PUSH/SELECT
until the digit appears, then
press
PUSH/SELECT
. The digit you entered appears on the display and the flashing cursor
moves to the next position.
WHAM PAGE
SETUP
SYSTEM
[EXIT]
16
SCRAMBLE
GROUP MMSI
USER MMSI
[EXIT]
16
USER MMSI
685749638
16
USER MMSI
685749638
16
CAN’T CHANGE
OVER 2 TIMES
USER MMSI
0
--------
16
