Uniden UM355, Owner'S Manual

Page: 20 / 40

Installing the Hardware
20
Installing the Flush Mount Bracket
1. Carefully cut a hole into the instrument panel
(or wherever you plan to mount the transceiver.).
Refer to page 28 for recommended dimensions.
2. Slide the transceiver through the hole as
shown in the image on the right.
A FLUSH MOUNT is available for mounting
the transceiver to a flat surface such as an
instrument panel.
CAUTION: KEEP the transceiver and microphone
at least 1 meter away from your vessel’s
magnetic navigation compass.
3. Attach the clamps on either side of the transceiver with 2 supplied bolts (5x8 mm).
Make sure that the clamps align parallel to the transceiver body.
5 Tighten the locking nuts (rotate clockwise) so that the transceiver is securely
mounted in position as below.
6. Connect the antenna and power cable, then return the instrument control panel to
its original place.
4. Tighten the end bolts
on the clamps (rotate
clockwise) so that the
clamps press firmly
against the inside of the
instrument control panel.