background image

How It Works

12

Using the radio in normal mode 

• 

To transmit, press and hold 

PUSH TO TALK

 on the microphone. Release the button 

when you are finished talking. 

• 

For the best sound quality, hold the microphone about two inches from your mouth 

while you’re talking. 

• 

Press 

CHANNEL UP

  on the radio to move up one channel at a time. Press and hold 

either button to scroll quickly up the channels. 

• 

Press 

CHANNEL DOWN

 on the radio to move down one channel at a time. Press and 

hold either button to scroll quickly down the channels. 

• 

To change the transmit power, press 

1W/25W/UIC

. The transmit power switches 

between 1 watt and 25 watts each time you press 

1W/25W/UIC

67 16

67 16

67 16

Every 2 seconds, the radio 

checks channels 67 & 16.

with Triple Watch on

Monitoring Channel 25

Press and hold the 

WX-DUAL 

or 

16/67-TRI 

button (on the radio) for two seconds to turn 

Triple/Dual Watch on or off. 

normal mode with Triple and Dual Watch  

If you activate Triple Watch while operating in normal mode, the radio checks 

channels 16 and 67 every two seconds; with Dual Watch turned on, the radio only 

checks Instant Channel. The radio will not check channels 16 or 67 while you are 

actively transmitting; it waits until your transmission is finished and then checks the 

channels.

Summary of Contents for UM355









































Reviews: