8
UNIDEN UH200 Series
Operation | MENU Mode
The squelch is used to eliminate any annoying background noise when
there are no signals present.
Sq 00 - max sensitivity (min squelch), Sq 09 - min sensitivity (max squelch)
To adjust the Squelch
• Press
[ M ]
2 times until
S9
flashes on the display.
• Then press
[ + ]
or
[ - ]
to change the setting between 00-09, and then
press & hold
[ M ]
to save the desired setting.
Squelch
NOTE
UHF CB Repeaters are used to retransmit or relay your signal.
Repeaters will extend the range of your radio and overcome the
shielding effect caused by solid obstructions.
Repeater channels can be selected directly as CHr1-r8
(CH01-08 repeaters) and CHn1-n8 (CH41-48 repeaters).
Contact your retailer for a list of repeaters available in your area.
The UH200 has 80 UHF CB Channels with selectable repeater channels for
CH01-08 and CH41-48.
To select a Channel
• Press
[ M ]
.
CH
flashes on the display.
• Then press
[ + ]
or
[ - ]
to change the channel between 01-80, and then
press & hold
[ M ]
to save the desired setting.
Channels
1. Channel Select
2. Squelch Select
3. CTCSS/DCS Select
4. Scan Start
5. Scan Memory On/Off
6. VOX Off/Select
7. BCL On/Off
8. Call Tone Off/Select
9. Roger Beep On/Off
10. Compander On/Off
11. Vibrate On/Off
12. Scramble On/Off
MENU Mode
