Uniden UDW20553, User Manual

Page: 22 / 30

22
Solving Problems
If you have any trouble with your system, try these simple steps first. If you still have a question, call
our Customer Care Line listed on the front cover.
If… Try..
The image on the
display is too bright.
-Adjusting the brightness on the receiver (in the system setup sub-menu).
-Moving the camera’s sun shield forward over the lens.
The image on the
display is too dim.
-Adjusting the brightness on the receiver (in the system setup sub-menu).
-Making sure the camera is at the right distance for low-light conditions.
Part of the image is
cut off.
-Moving the camera’s sun shield back away from the lens.
-Checking the camera path for any obstacles.
The image on my TV
is too bright/dark.
-Adjusting the brightness on your television. (The receiver brightness setting
does not affect the television.)
The image does not
fit my TV screen.
-Changing the TV out setting on the receiver (in the system setup sub-
menu).
The display is
completely blank.
-Making sure the AV output cable is not connected.
-Making sure the USB cable is not connected.
-Making sure the receiver is plugged in.
-Switching to a different camera. (If the receiver is in quad display mode and
the cameras are not working, the screen could be blank.)
-Resetting the receiver.
The display just
says No Signal .
-Switching to a different channel.
-Checking the channel status icon to see which channel the receiver is on.
Make sure the camera assigned to this channel is powered on.
-Re-pair the camera to the receiver.
The image on the
screen is frozen.
-Resetting the camera.
-Resetting the receiver.
None of the buttons
on the receiver or
the remote respond
when I press them.
-Resetting the receiver.