Using the Scanner Memories
on the HOLD icon. Then, select a memory by pressing
s
or
t
to go to the
memory or input the memory number then press
HOLD
.
Scanning Memory Banks
To scan the memories you have programmed, press
SCAN
. The scanner
scans all unlocked programmed memories in enabled memory banks,
stopping on a memory when it detects a transmission. To turn on/off
memory banks while scanning, press the number button that corresponds
to the memory bank you want to enable or disable.
Locking/Unlocking Memories
You can lock memories so that they are not scanned, even if their bank is
turned on. Simply press
L/O
when the scanner stops on a transmission on
the frequency or manually select the memory, then press
L/O
. The scanner
turns on the
L/O
icon when it is set to a memory that is locked out.
To unlock a memory, manually select the memory, then press
L/O
. The scanner
turns off the
L/O
icon and includes the memory when scanning its bank.
To unlock all memories, press and hold
L/O
for seconds, the scanner
beeps twice and the
L/O
icon disappears.
Using Priority Scan
You can set one memory in each bank as a priority memory. If you turn
on the Priority feature, the scanner will check the priority memories in
enabled banks every seconds, even if it has stopped on a transmission
on another memory.
To set the memory in a bank to be the priority memory, manually select
the memory then, while holding on the memory, press
E/PGM
to put the
scanner in program mode and press
PRI
. The scanner turns on the PRI
icon when it is stopped on a memory designated as priority.
To turn on Priority Scan, press
PRI
while the scanner is scanning or
holding on a memory (but not in program mode). You will notice a short
break in audio every seconds as the scanner checks the enabled priority
memories. If there is a transmission on a priority memory, the scanner will
immediately tune to that memory.
Using the Scanner Memories
UBC40CRS OM.indd
7/5/08 4:8:9 PM
