5
CAUTION:
Be sure to follow all safety warnings provided with the
antenna. Failure to do so could expose you to risk of injury or death and
could severely damage the scanner.
Using the Backlight
To turn on the backlight for 5 seconds, tap
SNOOzE/Backlight
. To turn
on the backlight permanently, press and hold
SNOOzE/Backlight
for over
seconds. To turn off the backlight, press and hold
SNOOzE/Backlight
again.
Country Mode (Australia/New zealand)
The UBC40CRS is set to the Australian mode by default.
Australian mode: Australian service search frequencies and TV channel
frequencies.
New Zealand mode: New Zealand service search frequencies and TV
channel frequencies.
The country mode can be switched between Australia (AUS) and New
Zealand (nL) as follows:
. Turn on the power while pressing down the
[HOLD]
key.
The display will momentarily show
AUS
for Australian mode or
nL
for
New Zealand mode.
The country mode is remembered for the next power on.
. To change the country mode again, repeat step .
Setting Up The Scanner
UBC40CRS OM.indd 5
7/5/08 4:8: PM
