34
PrograMMing cHannels
Now that you have configured your scanner, you are ready
to start using your scanner’s preprogrammed service banks,
the custom search banks, the Close Call feature. You can also
program your channel memories or re-program your 10 custom
search bank memories.
Before the scanner can begin scanning, you must program a
frequency into at least one channel.
1. To select a channel, press
Hold
then enter the channel
number (1-500).
2. Press
Pgm/E
to enter the
Channel
menu. (You can also
press
Hold
and scroll to the channel; press
Func
then
Pgm/E
.)
Note 1:
Turning
SCROll CONTROl
in
Function
mode will
allow you to select the first channel in each bank.
Note 2:
You can quickly store frequencies in
Scan Hold
mode
by entering the frequency and pressing
Pgm/E
.
3. Scroll to highlight
Enter Frequency
and press
Pgm/E
. You
will see the channel number and currently programmed
frequency. (To return to the previous screen, press
. Clr
.)
4. Use number keys and
. Clr
for a decimal to enter the
frequency. If you make a mistake, press
. Clr
to clear the
display. Press
Pgm/E
to store the frequency and return to
the
Channel
menu.
5. Press
. Clr
to return to the last screen.
Summary of Contents for UBC126AT
Page 69: ...69...
