20
•
Do not use and charge Ni-Cd batteries; this may cause a
safety hazard and damage the scanner.
Installing Non-Rechargeable Batteries
1. Make sure the power is turned off.
2. Slide the battery compartment cover off.
3. Use a pointed object such as a ballpoint pen to set the
battery selection switch inside the compartment to
AlK
.
4. Insert the batteries as indicated by the polarity symbols (+
and -) marked inside the battery compartment.
5. Replace the battery compartment cover.
Installing Rechargeable Ni-MH Batteries
You can also use two Ni-MH rechargeable batteries to power
your scanner. The Ni-MH batteries included with your unit are
not fully charged; you must charge them completely after you
install them into your scanner. See Charging the NiMH Batteries,
page 21, for details.
1. Make sure the power is turned off.
2. Slide the battery compartment cover off.
3. Use a pointed object such as a ballpoint pen to set the
battery selection switch inside the compartment to
Ni-MH
for Nickel Metal-Hydride batteries.
4. Install two batteries in the compartment as indicated by
the polarity symbols (+ and -) marked inside and replace
the cover.
Summary of Contents for UBC126AT
Page 69: ...69...
