30
Adjusting the Squelch
1. Press
Func
, then press
SCROll CONTROl
. The squelch
level indicator from 0 to 15 and battery voltage appears.
2. Turn
SCROll CONTROl
until the audio mutes. If the
scanner picks up unwanted partial signals or very weak
transmissions, increase the Squelch setting to increase the
signal level required to open squelch. To listen to a weak or
distant station, decrease the Squelch setting.
3. Press
SCROll CONTROl
to set the desired level and return
to the previous mode.
Setting the Backlight
Press
to turn on the backlight on and off.
1. Press
Func
and
to view the
Display/Charge
menu.
2. From this menu, scroll to
Set Backlight
from the
submenus. Press
SCROll CONTROl
.
3. Scroll to select one of the following settings:
•
Always Off - Backlight is always off.
•
Always On – Backlight is always on.
•
On with Squelch - Backlight is on while squelch is open
and until delay expires.
•
On with Keypress - Backlight is on for 10 seconds after
any key is pressed.
•
KSquelch – Both above-mentioned "Squelch"
and "Keypress."
•
< Back - Return to previous menu.
Summary of Contents for UBC126AT
Page 69: ...69...
