Contact Tech Support at 1.800.215.7015 or email at [email protected]
12
Plan the layout of your system
Before you get started you will need to plan the layout of your system. This
involves checking signal strength for signals coming from the cellular tower, as
well as antenna, booster and cable placement.
identify tHe beSt lOCatiOn tO inStall tHe Signal
(OutdOOr) antenna.
Check for signal strength
Select a location on t
he roof of the building to install the signal antenna,
by monitoring your cellular phone’s signal strength (signal bars) to find the
strongest signal from your carrier’s cellular tower.
Mark the area
Mark that area as the installation location for the signal (outdoor)
getting Started
there is enough separation between the distribution and signal antenna
or that they are shielded from each other to ensure the distribution
antenna does not send a signal back into the signal antenna. If you
cannot achieve these separations, either choose an alternate location
for the signal (outdoor) antenna or determine if there are natural barriers
in the building construction itself that will attenuate signals between
the two antennas so that oscillation can be prevented.
iMPOrtant:
Confirm that you have at least 20 feet
of vertical distance between the marked antenna
location and the location where you will place the
distribution
(indoor)
antenna. To prevent the system
from oscillation
(feedback)
you want to ensure that
!
Summary of Contents for U60 4G CELLULAR BOOSTER UNI-2005-CPAL
Page 1: ......
