Contact Tech Support at 1.800.215.7015 or email at [email protected]
34
My led’S are all green but My Signal iS Still
Weak - My COVerage iS POOr
If you receive a signal where you did not previously... or, if the radius
of the service area covered is small...and your LED’s are all green... the
booster is working properly but for some reason the signal is not very
strong. This can be due to weak input signal.
•
Adjust your signal (outdoor) antenna to point more accurately at the
cellular tower in order to increase the input signal.
•
Check the coaxial cable to ensure there are not any creases or cuts in it.
Perhaps the cable was damaged during installation.
WHy iSn’t My Cell PHOne indiCating MOre
Signal WitH MOre barS?
You may not always observe more bars on your signal meter because
of the signal spreading out from the antenna. If your phone has a db
meter, 3db is a significant increase of 2 times, 6db is 4 times, and 10db is
10 times. on a four bar phone, one “bar” equals about 10db.
The increase in signal you will see depends upon:
•
The level of signal at the signal (outdoor) antenna
•
The care of the antenna placement (2 feet away from metal, adequate
antenna separation [30 feet recommended] ).
•
The distance of your phone/device from the distribution (indoor)
antenna (signal spreads or diminishes rapidly with distance.)
Summary of Contents for U60 4G CELLULAR BOOSTER UNI-2005-CPAL
Page 1: ......
