[ 3 9 ] U S I N G Y O U R P H O N E
w w w . u n i d e n . c o m
3) Use the number keypad to enter your personal access number (up to 20 digits).
If you have an access number already entered, the current number will appear in
the display. To delete that number, press the
DELETE
soft key, then the
OK
soft
key.
4) If you need to have the phone wait before sending the next digits, press
redial /p
(or
redial/pause
on the base). A
P
appears in the display each time
you press
redial /p
(or
redial/pause
on the base); each pause inserts a two-
second delay in the dialing sequence, and each pause counts as one digit.
5) Press the
OK
soft key. You will hear the confirmation tone.
Setting Voice Mail Tone
There are two types of signals the phone company can use to tell your phone you
have a voice message waiting: Frequency Shift Keying (FSK) and Stutter Dial Tone
(SDT). The default is SDT. If your voice mail provider uses FSK to signal a waiting
message, follow the steps below to deactivate the SDT feature on your phone:
1) Press
MENU
soft key. Select the Global Setup menu, and then the Voice Mail Tone
Submenu.
2) Press
volume up/down
to select
L 1
or
L 2
, and then press the
OK
soft key.
3) Press
volume up/down
to turn the voice message
indication (SDT message signal) on or off.
4) Press the
OK
soft key. You will hear a confirmation
tone.
8 Q K E G / C K N 6 Q P G
1 P
1 H H
$#%-
& ' . ' 6 '
1-
USING YOUR PHON
E
UP772.book Page 39 Monday, August 29, 2005 1:15 PM
