Uniden TRAX430 Owner'S Manual Download

Page: 57 / 120

Page 57

How Do I Use It?

Selecting the destination from your Favourites

ou can select a location that you have already saved as a Favourite to

be your destination.
The procedure is explained starting from the Navigation menu.

1. Tap the following buttons:

(Simple mode) or

(Advanced mode).

2. Tap the Favourite that you want to set as your destination.
3. The map appears with the selected point in the middle. Tap

(Simple mode) or

(Advanced mode) from the Cursor menu. The route is then

automatically calculated, and you can start navigating.

Selecting the destination from the POIs

You can select your destination from the POIs included with TRAX430 or

from the ones you have previously created.
The procedure is explained starting from the Navigation menu.

1. Tap the following buttons:

(Simple mode), or

(Advanced mode).

2. Select the area around which the POI should be searched:

•

: The POI will be searched around a given address.

•

: The map appears with the Cursor in the middle.

Modify the location of the Cursor if necessary, then tap

. The POI will be searched around the given

Summary of Contents for TRAX430

























































































































Search results

Summary of Contents for TRAX430

Reviews:

Related manuals for TRAX430

Brands by name

Popular brands

Uniden TRAX430, Owner'S Manual

Search results

Summary of Contents for TRAX430

Reviews:

Related manuals for TRAX430

Brands by name

Popular brands