Memory
Store as many as 4 numbers in memory for easy dialing. They can be
stored the one-touch memory on the top of the Base unit. You can use the
space provided to either write the name of your contacts or stick pictures for
easy recognition.
Storing a Number in Memory
1. Pick up the handset or press SPEAKER.
2. Press the STORE button.
3. Dial the number to be stored (up to 16 digits).
4. Select and press any of the one-touch Memory Location buttons.
5. Hang up the phone or press the SPEAKER button.
Adding a Pause to the Dialing Sequence
Use the PAUSE button to insert a delay in the dialing sequence when
storing a number, for example, when you need to dial 9 to get an outside
line.
Pause function is enabled when the #pause button is pressed and held for
2 seconds.
Press and hold PAUSE button at the point in the dialing sequence in which
a pause is required.
The pause time is approximately four seconds, if additional time is needed,
press and hold the PAUSE button again.
Changing a Stored Number
Follow the same steps as “Storing a Number into Memory.” The new num-
bers will overwrite the existing numbers.
Dialing a Number from Memory
You can dial numbers from memory when using the handset or speaker-
phone. When you get a dial tone, press the one-touch memory button for the
number you want to dial.
