23
6.
Go to
Maintenance/System Upgrade/
XVR
Upgrade
tab. Browse to the USB drive and select
the firmware upgrade file.
7.
Click on the selected file
8. Click
Upgrade
9. The XVR reboots when the upgrade is complete.
HARD DISK DRIVE SETUP
UNCHECK MISSING ALARM FOR ALL UNINSTALLED HDDS
1.
Go to
Disk Manager/Storage Management
. A list of HDDs displays.
2. If the
Missing Alarm
column is checked for any non-installed HDD locations, uncheck it.
3. Click
Save
. A
Success
message displays; click
Exit
.
ADDING HDDS/RAID
The ProSeries XVR can have one or two hard disk drives (HDD) depending on the model (HDD
max size: 8TB per hard disk). If you want to increase the storage capacity, you can install another
physical hard disk drive (or more than one if supported by the recorder) and then format it to
create a standard sequential read/write configuration. When the first disk gets full, then the second
HDD will be written to, and then the next one, until all HDDs are full. The system will then overwrite
the oldest files first (FIFO).
From the same screen as before, review the installed HDDs. If you need more space, shut down
the system and install additional hard drives as needed.
The following systems have two SATA ports, but have room for only one HDD inside the chassis:
• XVR 4 channel - PRO400X1, PRO404X2
• XVR 8 channel - PRO800X2, PRO808X3
The PRO1600X2 also has 2 SATA ports and does have room for 1 additional HDD inside the
chassis.
Uniden ProSeries recorders come with high-quality hard drives designed for digital surveillance
systems with continuous 24/7 recording:
• Western Digital Purple Surveillance HDDs
• Seagate SkyHawk Surveillance HDDs
