19
2. Select
Save
, then click
Exit
to return to the Recording Setting screen.
3.
Go to
Channel Setting/Channel Parameter/Motion
tab. For each channel:
• Enable Motion Detection
• Select
Full Screen
. A red grid displays. This grid shows the areas that WILL trigger motion
detection. If you only want a specific area of the camera's view to trigger motion detection,
select
Clear all
, then click and drag the curser over the area you want to trigger recording.
This creates a specific red grid. Everything outside of the red grid will NOT trigger motion
detection.
4. Click
Save
.
5.
If you want to copy that channel's settings to another channel, Click
Copy
to at the bottom of
the screen. The
Copy to
popup screen displays
6.
Uncheck the options you don't want to copy. Select
All
(copy to all channels) or select specific
channels. Click
Confirm
and the
Motion tab
screen displays again.
