7
5. Adjust
RF GAIN
knob (small)
to optimize reception in strong
signal areas.
1. Select a channel.
2. Adjust
MIC GAIN
.
3. When the channel is clear, press
the microphone
PTT
switch
and speak.
RF Meter
: Measures RF Output
Power for transmitter. Press
microphone
PTT
switch to read
transmitting power.
S-Meter
: Measures incoming signal
strength. The meter swings to indicate
signal strength. i.e.
S 3, S 5, S 7 . . .
F
Fu
un
nccttiio
on
n M
Meetteerr
Be sure to read and understand Part 95, FCC Rules
and Regulations before operating your transmitter.
Perform a voltage Standing Wave Ratio (
SWR
)
measurement prior to using the transmitter. A
SWR
ratio in excess of 2:1 may damage the transmitter
T
To
o T
Trra
an
nssm
miitt
pc68ltw.qxd 3/15/99 1:26 PM Page 7
