6
1. Turn unit
ON
.
VOLUME
Control to a
comfortable level.
2. Select
CHANNEL
.
3. Set switch to
NB/ANL
.
Dynamic Squelch Control
automatically sets Squelch to the optimal level
for stronger signals. To scan for weaker signals, turn off
Dynamic Squelch
Control
and perform the following steps:
4. Turn
SQUELCH
fully clockwise
so only strong signals can get through.
4b. Turn
SQUELCH
fully counter-clockwise
until you hear a hiss. Everything gets
through - noise, weak signals, and
strong signals.
4c. Turn
SQUELCH
back clockwise until
the hiss stops. Only clearer signals get
through.
Set
SQUELCH
only
when
the radio is not receiving
a strong signal.
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
T
To
o R
Reecceeiiv
vee
pc68ltw.qxd 2/23/99 3:09 PM Page 6
