4
Front panel/Microphone
1.
PTT Switch
- Press to transmit and release to receive.
2.
16/9
- Instantly change to Channel 16, Channel 9 or current channel.
3.6.
STEP/SCAN
- Push this key to activate the step operation. Every time this
key is pushed, the radio will step to the next channel that has placed into
Memory. Pushing and holding this key for 2 seconds will activate the
channel scan feature.
4.5.
CHANNEL/
▲
/
▼
- Change the channel number up/down. These buttons are
used to adjust the volume for Hail mode and to move the cursor in Menu mode.
7.
UIC/MEM -
Push this key to change channel modes from USA to CANADIAN
to INTERNATIONAL. Pushing and holding this key for 2 seconds will place
the currently selected channel into Memory. Pushing and holding this key for
2 seconds again will delete the channel from scanning memory.
8.
PA
- Push this key to enable the PA (Public Address) feature.
9.
PWR/VOL
(On/Off/Volume) - Turns the unit On or Off and adjusts the
speaker volume.
10.
SELECT
- In the Menu mode this is used to select the menu options.
11.
H/L/MENU -
Change transmit power HI/LO and select Menu mode.
Press this key to change the transmit power to either High or Low.
Press and hold this key for 2 seconds to enter the Menu mode.
12.
WX/ALERT -
Select Weather channel and Weather Alert mode. Press this
key to listen to active NOAA Weather channels. Press and hold this key for
2 seconds to place the radio into the Weather Alert mode.
13.
16/9/TRI -
Access channel 16/9, and setup Triple Watch function.
Instantly change to Channel 16, Channel 9 or current channel. Press and
hold the key for 2 seconds to turn Triple Watch On/Off.
14.
DISTRESS
- Used to send a signal of distress in case of emergency.
15.
SQUELCH -
Eliminate background noise when a signal is not being received.
Controls and Indicators
4
3
2
1
7
6
9
8
5
15
11
10
12
13
14
UT910ZH (OCEANUS) OM 0811 8/11/03 10:45 AM Page 4
