22
3.
Select the individual you want to
contact using
CH
▲
and
▼
.
4.
Press
SELECT
to transmit the
individual DSC signal.
WAITING
appears followed by the
individual you have selected, and the
radio use 70 CH while transnitting.
5.
When you receive the individual
acknowledgment successfully
WAITING
will change to
COMPLETED
. Both radios tune to
the selected channel. You are now
ready to transmit on that channel.
Note:
If there is not any data registered in the directory, you cannot
proceed to the 2nd step. See the SETUP section for directory
setup instructions.
Select an open (unused) working channel first, then make the
call. After the acknowledgment, both radios tune to the
previously selected channel.
1-B. GROUP
1.
Press
SELECT
at
DSC CALL
.
The DSC CALL menu appears.
2.
Press
CH
▲
once to select
GROUP
.
UT910ZH (OCEANUS) OM 0811 8/11/03 10:45 AM Page 22
