40
2-D. AUTO CHANNEL SWITCH
This feature is to allow you to disable the automatic channel change that
happens when receiving a DSC call. This feature is useful when
engaged in bridge – to – bridge or other safety related calls. When you
have completed these calls, all of the incoming DSC calls received are
available in the call log.
1.
Press
SELECT
at
SETUP
.
2.
Press
CH
▼
three times to select
AUTO CH SW
.
3.
Press
SELECT
to enter the setting
mode.
4.
If you want to change this mode to
off
, you can change it by pressing
CH
▼
once. (Default is set as
ON
.)
5.
Press
SELECT
. The radio returns to
the
AUTO CH SW
screen.
UT910ZH (OCEANUS) OM 0811 8/11/03 10:46 AM Page 40
