25
2. At the
DSC Menu
, use
p
and
q
to select
Position Request
.
Press
[ENTER]
.
3. At the
Pos Request
screen, use
p
and
q
to select the individual
from the Directory taht you want the position of.
Note:
You must have entries in your directory to make a Position
Request Call. See the Setup Section (page23.)
4. Press
[ENTER]
. You will see the
Attention
screen. Use
t
or
u
to
select
Yes
and press
[ENTER]
to make the call. Or, select
No
and
press
[ENTER]
to cancel the call.
5. If the
Mystic
does not detect an acknowledgment, the following
screen appears.
6. When the called vessel sends the position information, the
following screen appears.
Note:
The requested radio must have the ability to transmit the
position information (such as another
MYSTIC
radio)
.
Position Send
This radio has the ability to send the position of your vessel to another
vessel using a VHF marine radio equipped with DSC.
1. Press
[CALL/LIGHT]
.
2. At the
DSC Menu
, use
p
and
q
to select
Position Send
.
Press
[ENTER]
.
3. At the
Position Send
screen, use
p
and
q
to select the individual
from the Directory you want to send your position to.
Note:
You must have entries in your directory to make an Individual
Call. See the Setup Section (page23.)
4. Press
[ENTER]
. You will see the
Attention
screen. Use
t
or
u
to
select
Yes
and press
[ENTER]
to make the call. Or, select
No
and
press
[ENTER]
to cancel the call.
5. When the calling radio receives an acknowledgment, the following
screen appears.
Standby
The DSC STANDBY function allows the MYSTIC to answer DSC calls
with the UNATTENDED message, and record the calls for response
at another time. When you set the MYSTIC to DSC STANDBY Mode,
voice traffic may still be active on any chosen channel.
1. Press
[CALL/LIGHT]
.
Mystic OMc.book Page 25 Wednesday, August 13, 2003 5:26 PM
