9
1.
Refer to your car’s owner’s manual to verify where
the power outlets are on and around the dashboard.
Locate an outlet that supplies 12V electric power
when the key is in the ON or ACC position.
2.
Connect the car adapter to the camera and to the
that power outlet.
3.
Start the car. The camera turns on automatically and
begins recording. When the car’s engine is turned
off, the camera will automatically turn off in a few
seconds.
Charge the camera for at least 15 minutes after it is
turned on for the first time or after it has been turned
off for more than three weeks.
4.
At other times, press the button to turn it on.
Press and hold the button to turn it off.
The camera charges the battery whenever power is
detected through the USB port. When the camera is
being charged, the red LED glows. It will automatically
turn blue when the camera has been charged completely.
The camera takes about 90 minutes to charge completely
from an empty state. The Battery Status icon displays
when the camera is disconnected from power and tells
you how full the battery is.
Empty
Low
Half Full
Full
Summary of Contents for iWitness DC3
Page 1: ...DC3 OWNER S MANUAL AUTOMOTIVE VIDEO RECORDER iWitness...
Page 27: ...27...
