Uniden iWitness DC3, Owner'S Manual

Page: 8 / 29

8
specific areas of the windshield. It is the owner’s
responsibility to mount the DC3 in compliance with
local laws.
ATTACHING THE DC3
1. Be sure the bracket locking ring is set to
UNLOCK
.
Press the suction cup base to the windshield.
2. Slide the DC3 onto the bracket hook on the top of
the windshield mount until it locks into position.
3. Turn the locking ring to
LOCK
. Make sure the stand
is locked to the windshield.
4. To unmount the stand, turn the locking ring to the
UNLOCK
position then lift the plastic flap on the
base to release it from the windshield.
INSTALLING THE MICROSD CARD
A compatible microSD card (8GB supplied) is
required to record and store videos and photos.
The camera can support microSDHC cards (High
Capacity microSD) up to 32GB in capacity. Uniden
recommends using a good quality microSDHC card of at
least 8GB capacity and minimum Class 10 speed. (An
8GB microSD card is included.)
Gently insert a formatted microSD card in the slot on the
side of the camera. To remove the card from the slot,
press the edge of the microSD card inwards for it to pop
out and then pull it out of the slot.
POWERING UP THE DC3
Only use the DC car adapter that comes with your
device. Any other adapter might damage the device.