27
Problem
Resolution
Low Handset or Speaker
Volumes
Check the volume settings.
Can’t Be Heard by Other
Party
Verify the phone cord is securely plugged in.
Make sure the MUTE function is off.
Memory Dialing
Make sure you entered the numbers correctly. (See
“MEMORY” section.)
No Information is Shown
After the Phone Rings
Are you subscribed to Caller ID service from your local
telephone company?
Be sure to wait until the second ring before answering.
Answering Machine
Doesn’t answer or
answers on 10th ring
Make sure the answering machine is turned on.
Check for a full memory; erase messages if needed.
Check AC power and phone line connections.
Incoming Messages are
Incomplete
Was an extention phone picked up?
The caller left a message that is longer than the message
length you set during setup.
Memory is full.
Won’t respond to remote
commands
Must use a touch-tone phone.
Must enter the correct security code.
Did the unit hang up? If no action is taken over a certain
period of time, the unit automatically hangs up.
Answering Machine
Won’t Work
Unplug the power cord from the electrical outlet and plug
it back in to reset the unit.
Screen displays
FLash
eRRoR
after the unit is
plugged in
Unplug the unit and plug it back in. If this message
appears again, it needs servicing.
Can’t Hear Messages
Adjust the volume control.
Greeting continues
playing after extention
phone is picked up.
This is a normal operation. Auto connect is delayed for
1 second after the unit answers a call. If you are near the
unit, press pLay/Stop to stop the greeting.
FP1355 OM.indd 27
22/9/11 9:23:51 AM
