background image

22

NOTE: The number of new calls displays until all new calls are 

reviewed.   

caLLer ID DISpLay meSSageS

The following messages display for incoming calls. 

BLOCKED CALL 

The caller of the incoming call is registered as 

PRivate  

nUMBeR

 and their Caller ID information is withheld.

CALL WAITING 

Indicates a call is waiting on the line.

INCOMPLETE DATA Caller information has been interrupted during transmission 

or the phone line is excessively noisy.

NO CALLS 

The caller memory is empty.

NO DATA

No Caller ID information was received.

START/END

You are at the beginning or end of the Caller ID memory log.

UNKNOWN 

CALLER

The incoming call does not have Caller ID service or their 
service area is not linked to yours. If 

UnKnown caLLeR

 

appears along with a calling number, the name information 

for that number was not available.

revIewIng cID recorDS

Press 

3. 

SkIp or repeat to view the call records.

Press 

• 

repeat (left) to scroll through call records from the oldest to the newest.

Press 

• 

SkIp (right) to scroll through call records from the newest to the oldest.

When all the records have been viewed, 

2. 

staRt/enD

 appears in the display.

CID Phone 
Number

CID Name

CID Record 
Number

Caller Status 
(new or repeat)

Message 
Waiting

Status 
Indicator 
Area

Date

Time

FP1355 OM.indd   22

22/9/11   9:23:51 AM

Summary of Contents for FP1355

































Reviews: