A D D I T I O N A L I N F O R M A T I O N
[ 51 ]
ADDITIONAL
INFORMA
TION
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. The first time you charge your
handset, the security code is automatically set. (See “About the digital security code”,
page 8.) In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code. To change the digital security code,
deregister the code, then register a different code.
Deregister the Digital Security Code
1) Remove the handset from the base. In the standby mode, press and hold
delete/transfer
and
end
for 10 seconds. You will hear a confirmation tone.
“
De-Register?
” appears.
2) Press
+
to select “
Yes
”, then
select/chan
. You will hear a confirmation tone, and
“
Deregistration Complete
” appears.
Changing the Digital Security Code
• If you have not pressed any key for 30 seconds while in the deregistering operation, the phone
returns to the standby mode.
• While in the deregistering operation, if you receive an incoming call, page, or transferring call, or
charge the handset, or press
talk/call wait
or
end
, the operation is canceled.
• While in the deregistering operation, if you receive CIDCW when the speakerphone is used, the
operation is canceled.
EXT1465 (ENG)-06/04 6/4/02 9:57 AM Page 51
