G E T T I N G S T A R T E D
[ 13 ]
INST
ALLING AND
ADJUSTING
GETTING ST
ARTED
C. Connect the base unit
1) Connect the AC adapter to the
DC IN 9V
jack and
to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and place the
handset in the base unit as shown.
3) Raise the antenna to a vertical position.
4) Make sure the
status
LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the base charging contacts.
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
electrical hazard.
•
Use only the supplied AD-312 AC adapter.
Do not use any other AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC
adapter easily.
• After installing the battery pack in the handset, charge your handset at least
15-20
hours before plugging into the phone line
. Once the handset battery pack is fully
charged, connect the telephone line cord to the base and telephone wall outlet.
5) Connect the telephone line cord to the
TEL LINE
jack and to a
telephone outlet once the handset is fully charged.
If your telephone outlet isn't
modular type, contact your telephone
company for assistance.
Modular
EXT1465 (ENG)-06/04 6/4/02 9:56 AM Page 13
