44
If your phone is not performing to your expectations, please try these
simple steps before calling Uniden customer service at
(800) 297-1023.
QUICK REFERENCE CHART
TR
OUBLESHOOTIN
G
YOUR NEW PHONE
The charge LED
won’t come on
when the handset
is placed in
the base.
l
Make sure the AC adapter is plugged into the
base and wall outlet.
l
Make sure the handset is properly seated
in the base.
l
Make sure the charging contacts on the
handset and base are clean.
PROBLEM
The audio sounds
weak and/or
scratchy.
l
Make sure that the base antenna is in a
vertical position.
l
Move the handset and/or base to a different
location away from metal objects or
appliances and try again.
Can’t make or
receive calls.
l
Check both ends of the base telephone
line cord.
l
Make sure the AC adapter is plugged into the
base and wall outlet.
l
Disconnect the AC adapter for a few minutes,
then reconnect it.
l
Place the handset back on the charging cradle
for a few seconds. The
status
LED blinks
indicating that the phone has been reset.
The handset
doesn’t ring or
receive a page.
l
The Nickel-Cadmium battery pack may be
weak. Charge the battery on the base for
15-20 hours.
l
Be sure the antenna is in a vertical position.
l
The handset may be too far away from the
base. Place the base away from appliances or
metal objects.
l
Place the handset back on the charging cradle
for a few second. The
status
LED blinks
indicating that the phone has been reset.
SUGGESTION
exs9660 Reference Guide.qxd 9/7/99 1:08 PM Page 44