Uniden EXI 7926 Owner'S Manual Download Page 30

Page: 30 / 46

After erasing a number, you may add a new address to memory.

From the handset

Pick up the handset from the base.

Press and hold for two seconds.
The handset shows the “

Memory Store

” screen with saved name/numbers

displayed.

Use the and keys,
or number keypad, to select the memory
location you would like to delete.
The and keys toggle
between the name display and the number
display.

Press . The following screen appears:

Use the key to move the

cursor to “

Delete Memory

”.

Press .

Use the key to move the

cursor to “

Yes

”.

continued next page

Erasing a number from memory

mem

Memory Store
01 JOHN SMITH
02 UNIDEN

mem

line1

line2

•

up/int'com

/conf

Edit Memory01
Delete Memory01
Go Back

chan

redial/p

sel/vol

/tone

oper

hold

tone

conf

int'com

flash

delete

call id

Delete Memory01?
Yes
No

Memory features

(continued)

sel/vol

/conf

Edit Memory01
Delete Memory01
Go Back

sel/vol

Notes

• If you select “

Go Back

” at any time, no changes are made and the

handset shows the “

Memory Store

” screen.

• If you select “

”, no changes are made. The handset shows the

“

Memory Store

” screen.

•

up/int'com

EXI 7926 H1 99.8.23 11:32 AM Page 30

Summary of Contents for EXI 7926















































Search results

Summary of Contents for EXI 7926

Reviews:

Uniden EXI 7926, Owner'S Manual, Page: 30 / 46

Search results

Summary of Contents for EXI 7926

Reviews: