Uniden EXI 7926 Owner'S Manual Download Page 28

Page: 28 / 46

To edit a number you have stored in the handset:

Pick up the handset from the base.

Press and hold for two seconds.
The display shows the “

Memory Store

” screen and any saved name/numbers.

Use the and keys,
or number keypad, to select the memory
location you would like to edit.

Press . The display shows the memory location you have selected.

Press again to enter the “

Edit Memory

” mode.

Press . The following screen appears,

and a cursor flashes indicating that the display

is ready to edit the name.

Enter the name with the and

keys.

Use the and keys
to enter symbols.
Use the and keys to move
the cursor left and right.

Press to remove any unwanted
character.

continued next page

Editing a phone number in memory

sel/vol

mem

Memory Store
01 JOHN SMITH
02 UNIDEN

mem

line1

line2

•

up/int'com

/conf

hold

conf

int'com

flash

delete

call id

Edit Memory01
Delete Memory01
Go Back

chan

redial/p

sel/vol

/tone

oper

hold

tone

conf

int'com

flash

delete

call id

Store Name
JOHN SMITH

Memory features

(continued)

sel/vol

•

up/int'com

/conf

•

up/int'com

/conf

delete/flash

oper

hold

tone

conf

int'com

flash

delete

call id

EXI 7926 H1 99.8.23 11:32 AM Page 28

Summary of Contents for EXI 7926















































Search results

Summary of Contents for EXI 7926

Reviews:

Uniden EXI 7926, Owner'S Manual, Page: 28 / 46

Search results

Summary of Contents for EXI 7926

Reviews: