manualshive.com logo in svg

Uniden EXI 7926, Owner'S Manual, Page: 23 / 46

Share
Download
Uniden EXI 7926 Owner'S Manual Download Page 23

23

A fourth person, at either the handset or the 
base, may be added to conference call.

For example, to add a fourth party at the handset 
to an ongoing conference call at the base:

1

Press            . The 

line 1

and 

line 2

LEDs 

turn red.

2

Press                       on the base to contact 
the handset.

3

Press                       on the handset.
Speak to answer the page.

4

Press                     at the base or 

at the handset to bring the 

party at the handset in on the call. 
The 

line 1

and 

line 2

LEDs are green.

The following screen appears:

5

To remove either caller from your conversation, ask one of the parties to hang up.
Press the corresponding line button to end the call.

4-way conferencing

line 1

line 2

conference

mute

hold

2-Line features 

(continued)

hold

status

memory page/int'com redial/p

flash

Tips

• When a call is on hold at the handset, and the base is paged, the base will

ring even when the 

RING VOL

switch is set to

OFF

.

• The person at the handset can join the conversation by pressing the line 

number currently in use.

conference

hold

conf

int'com

up

dn

flash

delete

call id

•

 up/int'com

page/int'com

line 1

line 2

conference

mute

hold

  (Conference)
 Line 1  Line 2

dn 

ª

/conf

EXI 7926 H1  99.8.23 11:32 AM  Page 23

Summary of Contents for EXI 7926















































Reviews:

No comments