Uniden EXAI978 - EXAI 978 Cordless Phone, Owner'S Manual

Page: 10 / 72

G E T T I N G S T A R T E D [ 10 ] www.uniden.com
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack.
The battery recharges automatically when the handset is
placed on the base unit.
Charge the handset battery pack for at least 15-20
hours before using your new cordless telephone for the
first time!
To maximize the charge capacity of your battery
pack, DO NOT plug the telephone cord into the base unit
and wall jack until the battery is fully charged.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into
the jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one-way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery, and listen for
a click to insure connection.
3) Make sure you have a good connection by slightly pulling
on the battery wires. If the connection is secure, the
battery jack will remain in place.
For optimum
performance use only
the Uniden BT-905
rechargeable battery
pack supplied with your
phone.