Uniden EXAI7980 Owner'S Manual Download

Page: 52 / 56

Additional information

(continued)

Symptom

The answering system does not
work.

The answering system does not
answer calls.

Messages are incomplete.

After a power failure, the
greeting is deleted.

No sound on the base unit
speaker during call monitoring or
message playback.

Suggestion

• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
• Press after an AC line spike.

• Select

REC TIME

switch to either the one

minute or four minute option.

• The memory may be full. Delete some or all of

the saved messages.

• The incoming messages may be too long.

Remind callers to leave a brief message.

• The memory may be full. Delete some or all of

the saved messages.

• Record your personal greeting again.

The prerecorded messages should remain.

• Adjust the speaker volume on the base unit.

EXAI 7980 6th HEN 5/22/00 18:13 Page 52

Summary of Contents for EXAI7980

























































Search results

Summary of Contents for EXAI7980

Reviews:

Related manuals for EXAI7980

Brands by name

Popular brands

Uniden EXAI7980, Owner'S Manual

Search results

Summary of Contents for EXAI7980

Reviews:

Related manuals for EXAI7980

Brands by name

Popular brands