manualshive.com logo in svg

Uniden EXAI7980, Owner'S Manual

Share
Download
Uniden EXAI7980 Owner'S Manual Download Page 36

36

Using the answering machine 

(continued)

1

Press               to change the status
from on to off. The LED display 
indicates the change.

2

When the unit is turned on, it 
initializes by playing the greeting. 
If you want to stop playing, press 

.

Turning the answering machine on and off

Check the LED display to see if the answering machine is on or off.  If the LED display
is on, the unit is on and ready to take messages.  If the LED display is off, it will not take
messages.

2 : 

2 times

4 : 

4 times

TS :

In the 

TS

(toll saver) position, if you

have new messages, the answering
system answers after two rings. If
there are no new messages, the
system answers after four rings.
This way, when you call long dis-
tance to check your messages, and
have no messages, you can hang up
after the second ring to save a
charge.

Setting the number of rings

Choose one of three settings by sliding the 

RING TIME

switch on the base unit to

one of the following positions:

EXAI 7980 6th HEN  5/22/00  18:12  Page 36

Summary of Contents for EXAI7980

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands