[ 3 3 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
w w w . u n i d e n . c o m
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after two,
four, or six rings. If you select Toll Saver [
], the answering system picks up after two
rings if you have new messages, and after four rings if there are none. This way, if you make
a long distance call to check your messages, you can hang up after the second ring to avoid
billing charges.
1) With the phone in standby mode, press the
menu/clock
key three times.
You hear "Ring time" and the current ring time ([
], [
], [
], [
] Toll saver), and it
is displayed on the base. Then you hear the guidance for setting the ring time.
2) Press the
or
/volume/select
key until the desired ring time appears.
3) Press the
set
key to select the new ring time. You hear a confirmation tone, then the
announcement "Ring time" followed by the new ring time. After a few seconds, the system
announces "To set record time, press menu again."
SETT
I
N
G U
P
YOUR
AN
S
W
ERI
N
G SYSTE
M
Summary of Contents for EXAI4248 Series
