GETTING STARTED
G E T T I N G S T A R T E D
[ 17 ]
1) When the phone is in the standby mode, press and hold
cid/menu
. The Caller ID setting screen appears.
2) Press
3
or press
twice to select ¨
Area Code
¨.
3) Press
select/channel
.
4) Use the number keys (
0
to
9
),
#/
,
*
/tone/
or
delete/transfer
to enter the 3-digit area code.
5) Press
select/channel
. A confirmation tone sounds and the displayed area code is
entered.
6) Press
end
or return the handset to the main base unit. The handset returns to the
standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/transfer
and number keys to enter the new area code.
Then press
select/channel
. A confirmation tone sounds.
To complete the setting, press
end
or return the handset to the
main base unit.
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However some phone systems still use pulse dialing such as in rural areas. The
default setting is tone dialing. Depending on your dialing system, set the mode as
follows:
Make sure your battery
pack is fully charged
before choosing the
dial mode.
DXI386 6/7/2 10:51 AM Page 17
