M E M O R Y D I A L I N G
[ 28 ]
Memory dialing from Talk Mode
1) Press
talk/flash
. ¨
Connecting
¨
appears.
2) After the display changes from ¨
Connecting
¨ to ¨
Talk
¨,
press
mem
.
3) Enter a number (0 - 9) to select the memory location of
the desired phone number. The selected phone number is
displayed. Then the number is dialed.
4) To hang up, press
end
.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can also
store a group of numbers (up to 20 digits) that you need to enter once your call
connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and
are prompted to enter the account number, simply press
mem
and the location
number where the special number has been stored.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names" on page 23.)
Talk
Volume High
Connecting
Talk 0:00
Talk 0:35
0123456789012
If you select a memory
location that does not
have a stored number,
an error tone sounds
and the phone will not
dial.
DXI386 6/7/2 10:51 AM Page 28