G E T T I N G S T A R T E D
[ 7 ]
www.uniden.com
GETTING STARTED
B. Install the rechargeable battery packs into both handsets
Both handsets are powered by rechargeable battery packs.
The battery recharges automatically when the handset
is placed in the base unit or the charging cradle.
Charge the handset battery packs for at least 15-20 hours
before using your new cordless telephone for the first
time!
To maximize the charge capacity of your battery pack,
DO NOT plug the telephone cord into the base unit and wall
jack until the battery is fully charged.
1) Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward
to remove.
2) Plug the battery pack connector (red & black wires) into
the small, black jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one-way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery and listen for a click
to insure connection.
3) Make certain you have made a good connection by slightly
pulling on the battery wires to insure that there is a secure
connection. If the battery connector is not securely connected,
the handset will not charge properly.
•
Use only the Uniden
(BT-905) rechargeable
battery pack
supplied with your
cordless telephone.
• Place the second
handset in the charger
with the keypad facing
forward for 15-20
hours before use.
DXAI3288-2 2/4/03 1:16 PM Page 7
