A D D I T I O N A L I N F O R M A T I O N
[ 53 ]
www.uniden.com
ADDITIONAL
INFORMATION
Changing the Digital Security Code
The digital security code is an identification code used to connect each handset and
the base unit. Normally, setting the code is not necessary. The first time you charge
each handset in the base, the security code is automatically set. In the rare situation
that you suspect another cordless telephone is using the same security code, you can
change the code.
1) Remove the handset from the base unit. Press and hold the
find hs
key on the base.
2) While the handset is emitting the paging sound, place the handset on the base unit
holding the
find hs
key. The paging sound stops. Leave the handset on the base for
more than 3 seconds. A new random security code is set.
Headset Installation
Your phone may be used with an optional headset, the Uniden HS910.
To use this feature, insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts Department or
visiting the web site. See Quick Reference Guide on page 1.)
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on
each side of the handset. Press down
until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release
the tabs from the holes.
• To protect you against
misbilled calls which
might result from your
phone being activated
by other equipment,
the cordless phone has
AutoSecure
TM
feature
electronically locks
your phone when each
handset is in the base
or charging cradle.
Random Code
TM
digital
security which
automatically selects
one of over 262,000
digital security codes
for each handset
and base.
• If the handset battery
pack is completely
discharged or the
battery pack is
removed, the digital
security code will be
lost. If this happens,
a new security code is
set automatically next
time the battery pack
is charged.
You can change the phone’s digital security code on either handset. However, you must re-register
the other handset (not used to change the digital security code) back to the main base unit. See
registration on page 11.
DXAI3288-2 2/4/03 1:19 PM Page 53
